EP-10 Fuel Flow is a discontinued product

EP-10 Fuel Flow Sensor image

Replacement for EP-10 Fuel Flow

EP-60R Fuel Flow

EP-60R Fuel Flow

Gasoline only. One required per engine.

EP-10 Fuel Flow Sensor

Gasoline only/single engine, twin engine requires two. 

 

Cable Length:  10 Ft
Fuel Line Diameter:  3/8" (9.5 mm) Inside Diameter
Flow Rate Measured:  Optimized for 0.6-45 Gal/hr but can measure outside these values
Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
Installation Location:  Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
Package: The EP-10, LowranceNet T and 2 (two) 1" hose clamps
Fuel Type: Gasoline only. The EP-10 does not operate diesel engine fuel systems.
Hole required to route through a bulkhead: 7/8" (22mm)
Multiple EP-10 sensors possible: Yes 


 

For use with LowranceNET networks with blue connectors (do not connect to red connectors).

Our network of expert dealers can help you choose the right product for your boat. Find a dealer near you.
Search for the answer you are looking for or download many of our manuals available online. Read product articles, watch product videos or locate a dealer for support.